Войти зарегистрироваться
TOO Мастер Инк
  • 0
  • 0 шт.

Категории товаров

Категории

Категории блога

Sinilink XY-WFTX XY-WFT1 (eng)

05.01.2024 21:51
Sinilink XY-WFTX XY-WFT1 (eng)
Sinilink XY-WFTX WIFI Remote Thermostat Module Temperature controller module refrigeration and heating high and low temperature alarm

 
contents
Sinilink XY-WFTX WIFI Remote Thermostat Module Temperature controller module
refrigeration and heating high and low temperature alarm..................................................... 1
contents................................................................................................................................ 1
  1. . Product Parameter ......................................................................................................... 3
  2. .Automatic mode description ............................................................................................ 5
    1. Automatic mode function description ........................................................................... 6
    2. Heating mode description .......................................................................................... 6
    3. Refrigeration mode description ................................................................................... 6
    4. Description of the time-delay startup function ............................................................... 6
    5. Temperature correction function .................................................................................. 6
    6. High-and low-temperature alarm function ..................................................................... 6
    7. Emergency braking function (Emergency stop function)................................................. 7
    8. Whether the product can be run offline in automatic mode ............................................ 7
    9. The LAN data export function ..................................................................................... 7
  3. .Manual mode description ................................................................................................. 8
    1. Manual mode function description............................................................................. 9
    2. Description of power status setting .......................................................................... 9
    3. Can the product be run offline in manual mode .......................................................... 9
    4. Additional functional description in manual mode ....................................................... 9
  4. . Share the settings ......................................................................................................... 9
5.operation note..................................................................................................................... 10
  1. .Cloud recording and upload frequency................................................................................ 11
    1. Set upload rate  11
    2. Cloud data export  12
  2. . Key button function and indicator light status ................................................................... 13
    1. Keybutton function..................................................................................................... 13
    2. Description of the indicator lamp function...................................................................... 13
  3. . Mail notification function: ................................................................................................ 13
    1. How to bind a mailbox ............................................................................................... 13
    2. Turn on the mailbox notification function for the device .................................................. 13
  4. .How to distribute the distribution network .......................................................................... 14
    1. TouchTouch mode...................................................................................................... 14
    2. AP model.................................................................................................................. 15
  5. .How to download a mobile APP ...................................................................................... 16
  1. Product Parameter

 
  1. Power supply voltage: DC6.0V~30V, supports micro USB 5.0V power supply;
  2. Temperature control range: -40°C ~110°C;
  3. Temperature control accuracy: 0.1C;
  4. Measurement input: NTC10K length of 0.5 m, waterproof type, supporting 18B20 digital sensor access;
  5. Refresh frequency: 1 second;
  6. Output type: 10A relay output (relay equivalent to switch, only switch, not external output voltage);
Product parameter information comparison table
 
 
 
Product Image
 
 
temperature display
 
 
Supply voltage
 
 
DC 6~30V
 


 
 
 
 
 
 
 
 
 
 
support
Подпись: supportUSB powered

 
 

Temperature control range
Temperature
control accuracy
NTC Temperature
measurement range
Yes/No
support 18B20
-40-110°C
support(-40~110°C)
 
 
 
output type
 
 
Relay switch, current less than 10A
 
 
Alarm notification
 
 
Support WeChat alarm notification
 
 
Cloud data logging
 
 
15 days cloud record, can be exported at any time
 
 
Timer switch function
 
 
support
 

 
 
 
 
 
   
Wechat | Email
 
 
Current state
 
 
Select mode
 
 
Set Temp:
 
 
Delay start setting
 
 
Back Temp:
 
 
E-mail notification switch on switch off
 
 
Firmware version Remote firmware
 
 
Temperature correction
 
 
Unit switch Celsius/Fahrenheit
 
 
Current
Temperature
 
 
Set temperature and hysteresis ‘
 
 
Cur: 28.1 *c 2
 
 
State: -O~ (Stop heating)
 
 
Set upload frequency
 
 
Cloud records Upload set
 
 
Operation record
 
 
Cloud recording function
 


 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  1. Automatic mode function description
  1. The 1) first selects the heating mode / cooling mode;
  2. sets the temperature and return difference. If the delay start is required, set the delay start time
  3. If high and low temperature alarm is required, set high and low temperature alarm threshold
    1. Heating mode description
When the detection temperature (current temperature) ^ sets temperature-return temperature, relay leads on and heating equipment starts working;
When the detection temperature (current temperature) ^ sets the temperature, the relay is disconnected and the heating equipment stops working;
For example: set temperature 30°C and return temperature 5°C;
When the temperature is 20°C s£ 25°C (30-5 = 25), the relay suction starts heating, when the temperature reaches 30°C > the set temperature is 30°C, the relay is disconnected and stops heating;
  1. Refrigeration mode description
Detection temperature (current temperature) ^ set temperature + return temperature, relay leads on and refrigeration equipment starts working;
When the detection temperature (current temperature) ^ sets the temperature, the relay is disconnected and the refrigeration equipment stops working;
For example: set temperature 30°C and return temperature 5°C;
When the temperature is 36°C > 35°C (30 + 5 = 35), the relay suction starts refrigeration, when the temperature reaches 30°C s£ the set temperature is 30°C, the relay is disconnected and the cooling is stopped
  1. Description of the time-delay startup function
How long is the delay (unit: seconds) after the first heating / cooling process will allow the next heating / cooling;
  1. Temperature correction function
The system is working for a long time and may appear deviation. Through this function correction, the current temperature = measures the temperature + calibration value;
  1. High-and low-temperature alarm function
buzzer on and off: on, the buzzer will sound after the alarm. After pressing the button, the buzzer stops sounding;
High temperature alarm: After the high temperature alarm is opened, after the current temperature is higher than the high temperature alarm temperature, the relay is disconnected;
Low temperature alarm: After opening the low temperature alarm, after the current temperature is below the low temperature alarm temperature, the relay is disconnected;
  1. Emergency braking function (Emergency stop function)
After the emergency stop, the relay will be disconnected in whatever state; after the emergency stop is closed, the relay returns to normal state;
  1. Whether the product can be run offline in automatic mode
In automatic mode, when the parameters are set, the product can run off the network offline, the parameter power loss is not lost.
  1. The LAN data export function
A temperature data is transmitted on the LAN in 1 second. Click "Export", it is automatically exported to the EXCEL to analyze the temperature data

3.Manual mode description
   
5.operation note
All operation records can be stored in the background, and the + timer + button + APP + heating and cooling mode to query the relay operation status;
 
 
 


 
Type |
Time
| Execute
RESTART 2022-03-09 11:02:41 Relay OFF
HOT 2022-03-09 10:59:39 Relay ON
RESTART 2022-03-09 10:58:56 Relay OFF
RESTART 2022-03-09 10:16:50 Relay OFF
RESTART 2022-03-08 15:07:09 Relay OFF
COLD 2022-03-08 00:43:02 Relay OFF
HOT 2022-03-07 11:04:54 Relay ON
Alarm_OTP 2022-03-04 08:53:42 Relay OFF
HOT 2022-03-03 12:43:29 Relay ON
KEY 2022-03-03 11:55:13 E-stop Close
KEY 2022-03-03 11:55:09 E-stop Open
HOT 2022-03-03 11:34:03 Relay OFF
HOT 2022-03-02 14:40:02 Relay ON
RESTART 2022-03-02 14:00:04 Relay OFF
HOT 2022-03-02 13:49:19 Relay OFF
KEY 2022-03-02 13:49:06 E-stop Close
RESTART 2022-03-02 13:42:26 Relay OFF
RESTART 2022-03-02 13:34:57 Relay OFF
HOT 2022-03-0213:28:32 Relay ON
RESTART 2022-03-02 12:01:42 Relay OFF
  Click load more  
 
6.Cloud recording and upload frequency
6.1 Set upload rate
Temperature data can be stored in the background, the frequency of log upload can be set for 1 second / bar (one default 5 minutes); the data can be inquired for any time period at will and retain data within 15 days at the maximum period; the cloud data export function can be added to make the next analysis of the temperature data;
 
6.2 Cloud data export
You can choose to export data for any period of time within 15 days and save it locally for later data processing and analysis;
В ± i И                                                                               Q 3:54
<-                       Control device
Start       2022-03-11 15:49
End         2022-03-11 15:54
Query
Data export

Note: cloud records can be kept for up to 15 days
 
Serial |                              Time                       | Temp(’C)
There is no data in this period
 
  1. Key button function and indicator light status
7.1 Keybutton function
Short press:
On / off the relay in manual mode;
In automatic mode, turn the emergency stop function on / off
Note: under the buzzer alarm state, briefly press the key to cancel the buzzer alarm, and do not perform other actions;
Press for 5 seconds: switch the pairing mode Touch/AP, to let the product into the pairing state;
7.1 Description of the indicator lamp function
Blue indicator lamp: the network status indicator lamp
  1. is not connected to the router: bright 1S out of 0.1S so reciprocating;
  2. link router but not connected: flash once, flash once so backwards;
  3. Touch pairing mode: flash 4 times and then wait 1S so reciprocating;
  4. AP pairing mode: blue light continuous flash;
  5. networking success: the blue indicator light is always on;
Green indicator lamp: touch on and emergency stop indicator lamp
Turn on the emergency stop, and the green indicator light will flash;
In manual mode, if the green indicator is on
Red indicator lamp: relay status indicator lamp;
  1. Mail notification function:
    1. How to bind a mailbox
Turn on the mail notification
 
 
 
 
       
 
Wechat|Email:
Open ф
 
firmware:V1.0.3
It's the latest
 
 
 

  1. Open the APP into the device operation interface, the top left corner is the switch of the mail notification function; if the email notification is turned on, when the computer status sends the change will send the latest status and operation type of the computer in real time through the mailbox used to register the APP;
Operation types are divided into five types: 1. Equipment power 2. Key operation 3.
Timer operation 4.APP operation 5. Point operation operation; as shown in the figure below
 
 
 

  1. Turn on the mailbox notification function for the device
  1. opens sinilink APP, to find the added thermostat device and enter the operation interface;
There is a "WeChat | Mail Notification" switch in the top right corner of the 2., set to "open" to receive the email notification of the product;
The 3. mailbox notification type
High temperature and high high temperature alarm is lifted
Too low temperature and low temperature alarm is discharged
Sensor abnormal sensor abnormal abnormally
Start the heating and stop the heating
Start refrigeration and stop cooling
 
  1. How to distribute the distribution
network
  1. TouchTouch mode
 
1. Press the product button for more than 5 seconds to let the product into the Touch pairing state (the blue lights flash 4 times quickly and extinguish 1S so reciprocating)
2. The APP operation is as shown below:
 
 
  1. AP model
Press the product button for more than 5 seconds to bring the product into the compatibility mode (AP mode) pairing state (the blue lights continuously flash
 
 
 
 
 
 
 
 
 
Fifth step
Подпись: Fifth stepSixth step
4:15 PM                                                                      .’«■=: .Ill .Id fiW 48 }
<-                         Add Device
1. Press the matching button for a long time until the indicator flashes continuously (as shown below), when the device enters compatible matching mode
 
 
WLAN                              ®
Sa.ed
SinilinkProduct '* Connected
«I TP-LINK_2.4G_xinyi
Available network
Asfly
AsHobby
CAR-DVR-e912
Setting
Enter the phone setting interface and connect the WIFI network to Sini1inkProduct (password is 12345678)


2. Enter the mobile setup «iterface and connect the network to the SiniSnk Product network (password 12345678)
□ ia®
~~                                               -■■■ I
о «• 0 о «...                                      •
1^
Go back to Sinilink APP and click “'Next*'
 
Next step
Seventh step
Click "Finish adding" and waitfor the mobile phone to connect successfully, and then automatically return to the app device interface

10.How to download a mobile APP

 
Scan Download АРР
Scan the code to download APP, foreign customers please download in Google market, search for 'sinilink' download
Теги: Sinilink, WIFI relay, XY-WFTX, XY-WFT1
Вернуться к списку
 
2019 год. Все права защищены.
Сайт работает на движке: Moguta.CMS - Выбирай лучшее!
Яндекс.Метрика